Arnoldfreunde

Hello, friends.
SInce I was afraid of overheating several times last summer, I decided to pay attention to the radiator. I could not find a new one and so I decided to take advantage of the service of a company for the repair of radiators, as we decided to replace the radiator core. I haven't ...

Hi,
Not sure if I have understood what you need.
Regards.

Hello Denis
For me, the problem is solved with roller blinds for domestic windows.
They do a very good job. Last year I renewed the old plastic slats with new ones - aluminum cladding filled with polyurethane foam. If you are interested, you can paint with dry powder with a color of your choice RAL ...

Hello,
the leak was not from the brake calipers.
I went to a car repair shop and they explained to me,
that the drive shaft bearing seals are worn out and must be replaced.
I got a call today that it was ready. I went to get it, but was unpleasantly surprised that they also changed the bearings on ...

Hello,
I have a problem with the rear brakes. The pads are oiled.
Is it possible for differential oil to enter the drums?
Thank you in advance.

Hi,
You were right. The battery is finished.
I have not yet clarifyed whether it is a coincidence or a malfunction.
Thank you.

Hello friends.
I'm not sure if this is the place to ask a few questions.
It so happened that after a smooth start of the engine and driving 200 km. with the 12-volt refrigerator on, I stopped for 20 minutes and forgot the headlights on. Then I failed to start the engine.
My question is in what ...

Hello
I used an old kitchen knife (with a rounded blade and tip) as a scraper. You can also use a spatula, which is narrow, stiff and with rounded edges, because they will get stuck in the plywood and you will break the smooth surface. I haven't tried a plastic scraper. In my opinion, it will not ...

Hi Christine,
your problem is not big and is easy to solve.
Everything mentioned earlier is the best that can be done. But if you find it difficult to find a sheet of GRP (glass reinforced plastic) just use some other type of plastic - hips, polyethylene, polystyrene or anything else you can easily ...

Hello David,
I can share my experience in this field.
First, if you want to re-glue the foil, you do not need to clean the remaining glue on the plywood. The glue must be cleaned if you want to varnish or paint. Since the glue Arnold used was polychloroprene, just use the same type of glue and you ...

Hello friends,
I had some time left and decided to renovate the bathroom.
My idea is to remove the existing gravity flush toilet.
Can anyone explain to me how to remove the flange to which the toilet bowl is attached. I tried to unscrew it, but it didn't work.
Thank you in advance.

Hi Wolfgang,
Well done.
The best approach and professional performance.
It seems very easy but I am sure that you have
spent many hours of planning and organising.
It is obvious that you have a lot of experience.
Kind Regards
Georgi

Hello
i have the same problem with starting from first gear.
I just stopped using it when I'm on a flat or slight slope. This is a temporary solution but it works. Arnold starts from second gear perfectly. I'm talking about a 5-speed gearbox.
I hope you write in detail how you dealt with the problem ...

Hi Rudi,
For interior in my opinion the best kind of glue is polychloroprene adhesive.
Best Regards.
Jack.

Hello friends,
I'm done with the upholstery.
It became decent.
I will celebrate it with the greatest pleasure with the best beer I have ever drunk.
Valleysboy if you read, sorry for the question, but how to pronounce Nantybwch :)

https://arnoldfreunde.bboard.de/board/files/54233095nx41493 ...